Programmable Digital Room Thermostat - Heatmiser PRT :: Slimline Series :: 230v Thermostats

Printable version

Categories

Heatmiser Thermostat Shop :: 230v Thermostats :: Slimline Series :: Programmable Digital Room Thermostat - Heatmiser PRT

Programmable Digital Room Thermostat - Heatmiser PRT

Details


SKU	Heatmiser PRT White
Price:	£44.99 including VAT

Options

Colour

Terminal Output

Back Box Type

Infrared Remote (RM1)

Quantity

Add to cart

The Heatmiser PRT is our 5/2 day programmable room thermostat. The PRT is a programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building. In addition, this thermostat includes a keypad lock - so you can finally stop the fiddling.

The following features are available;

Large display
Self Learning Optimum Start
Automatic blue back-light (Turns off after 30 seconds)
Flush mounting
°C / °F Selectable
30 minute timing increments
5/2 day Heating Program

Up to 4 changes in room temperature

Key Locking Facility
Frost protection with adjustable temperature setting.
Easily increase or decrease the required temperature
Remote control optional
Supply: 230v / 110v Option
Outputs: Volt free 3A Max
Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)

(Please note 13mm depth is after installation)

Programmable Versus Non Programmable: For those of you thinking of replacing a mechanical thermostat, we would always suggest you opt for the Heatmiser PRT. This model will allow you to program various comfort levels throughout the day. You would simply set your existing timeclock into Heating Constant mode, and let the PRT thermostat do the rest. See the FAQ section below for further advice on this.

Mounting: This thermostat is flush mounting, and therefore requires a back box sunk in the wall to accommodate the terminal box for the thermostat. We suggest a back box of 35mm which you can buy here.

Frequently Asked Questions:

Q Can I replace my existing mechanical thermostat with the Heatmiser PRT :

A You need to check the number of wires you have behind your existing thermostat. If you have three, not counting the earth, then the PRT can be used as a replacement. (Note: It is likely you have an existing timer controlling the heating & hotwater. We would suggest you put this timers heating channel into Constant, then use the Heatmiser PRT to act as a programmer and thermostat.)

Q I have checked and I do have three wires, can you explain what these are ?

A These wires are known as Live (Red), Neutral (Blue) and Switch Live (Yellow) The Live and Neutral is used to power the thermostat. The switch wire becomes live when there is a demand for heat. (You should always check the colour coding used by the original installer)

Q I have a combi boiler. Can I use this thermostat ?

A Yes, you would have two connections from the boiler which would connect across our A1, A2 terminals. Live and Neutral would be connected as usual. (4 wires required for this installation)

Terminal Options:

Standard 230v - Select this terminal output if your supply power is 230v and you require a switch live or boiler control circuit. You should have 3 or 4 wires at the thermostat (not counting earth)

Changeover - Select this terminal output if your supply power is 230v and you have a valve that needs power to open, and power to close.

Standard 110v - Select this terminal output if your supply power is 110v and you require a switch live or boiler control circuit.

Manual Download

Accessories for this Product

#16176	Dry lining Accessory Box
#16177	Metal Fixing Box
#16151	Central Heating Remote Control - Heatmiser RM1

Your cart

Cart is empty

View cart
Orders history

My Account

Test and Measurement Instruments by Digital Meters.com