The Heatmiser PRT/HW-N is our low voltage 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW-N really is an all-in-one solution.

The following features are available;
 

• Large display
• Automatic blue back-light (Turns off after 30 seconds)
• Optimum Start (Energy saving feature)
• °C °F Selectable
• Flush mounting
• Heatmiser TouchPad, PCLink, Netmonitor Compatible
• Time Sync( When used with TouchPad / PCLink)
• 30 minute timing increments
• 5/2 day Heating Program
• 5/2 day Hot water Program
• Up to 4 changes in room temperature
• Key Locking Facility
• Frost protection with adjustable temperature setting.(7-12°C)
• Easily increase or decrease the required temperature
• Remote control optional
• Supply: 12v
• Outputs: Volt free 3A Max
• Dimensions:  98mm x  85mm x 13mm (Height, Width, Depth)

  (Please note 13mm depth is after installation)

   

Manual Download

Mounting: This thermostat is flush mounting, and therefore requires a back box sunk in the wall to accommodate the terminal box for the thermostat. We suggest a back box of 35mm which you can buy here.