12v Network Programmable Room Thermostat - Heatmiser PRT-N

Product Description

The Heatmiser PRT-N is our 5/2 day or 7 day programmable thermostat. The PRT-N is a programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.

It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building.

The following features are available on our programmable thermostat (PRT-N);

Large display
5/2 day or 7 Day Programming (Selectable in software)
Compatible with our Network Products
Self Learning Optimum Start on 1st and 3rd Level
Temperature Hold Facility
Holiday Facility
Automatic blue back-light (Turns off after 30 seconds)
Flush mounting
°C / °F Selectable
Up to 4 changes in room temperature
Key Locking Facility
Frost protection with adjustable temperature setting.
Remote control optional
Supply: 12v /
Outputs: Volt free 3A Max
Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)

(Please note this thermostat is flush mounting. After installation the depth is 13mm)

Not sure if this is the right product for you? Click here to see our FAQ

Version Notice:

This product is version 3. Version 2 and version 3 should not be used on the same network system. If you adding to an existing system and are not sure what version of thermostats you have, click here.

Product Reviews

Siting in Bathroom

Posted by Cal on 1st Aug 2009

Q: Is this thermostat suitable for a bathroom? If not, is there another thermostat that I can use in the bathroom? Thanks.

A: You can, but if there is a high level of condensation we wouldnt recommend it. So, you have 2 options;

Install our PRT-EN in the adjacent room and install the probe in the bathroom.

Install our PRT2-NTS which is our 2 zone model which can control the bedroom and en-suite. This model is supplied with a remote sensor for the en-suite.