Loading... Please wait...
Categories
- Display Boards
- 230v Thermostats
- Wireless Underfloor Heating Control Bundles
- Wireless Thermostats
- 12v Network Thermostats
- Electric Floor Thermostats
- Wiring Centres
- Network Products
- Fan Thermostats
- Time Clocks / Programmers
- Accessories & Fixings
- Warm Air / Radiant Heating Controls
- Building Heating Management System
- Boiler Controls
- Industrial Sensors
New Products
Our Newsletter
12v Network Programmable Room Thermostat - Heatmiser PRT-N
Product Description
The following features are available on our programmable thermostat (PRT-N);
- Large display
- 5/2 day or 7 Day Programming (Selectable in software)
- Compatible with our Network Products
- Self Learning Optimum Start on 1st and 3rd Level
- Temperature Hold Facility
- Holiday Facility
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Remote control optional
- Supply: 12v /
- Outputs: Volt free 3A Max
- Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note this thermostat is flush mounting. After installation the depth is 13mm)
Not sure if this is the right product for you? Click here to see our FAQ
Version Notice:
This product is version 3. Version 2 and version 3 should not be used on the same network system. If you adding to an existing system and are not sure what version of thermostats you have, click here.
Accessories
-
-
-
-
-
-
-
-
Powered Relay Card $53.60
Product Questions
-
PRT-N in a bathroom
Posted by Gary Wilcockson on 6th Apr 2010
Q: I would like to fit a PRT-N thermostat in a bathroom its a low condensation room will it be ok
A: From a regulations point of view, its fine. However the unit is not IP rated and so any moisture will damage the electronics. You should be careful where you position the thermostat.
-
Siting in Bathroom
Posted by Cal on 1st Aug 2009
Q: Is this thermostat suitable for a bathroom? If not, is there another thermostat that I can use in the bathroom? Thanks.
A: You can, but if there is a high level of condensation we wouldnt recommend it. So, you have 2 options;
Install our PRT-EN in the adjacent room and install the probe in the bathroom.
Install our PRT2-NTS which is our 2 zone model which can control the bedroom and en-suite. This model is supplied with a remote sensor for the en-suite.
- Home
- 12v Network Thermostats
- Slimline Thermostats
- 12v Network Programmable Room Thermostat - Heatmiser PRT-N
Your Shopping Cart
You have 3 items in your cart. Your sub total is $537.16.
- 1 x Set Back Thermostat - Heatmiser DS-SB $53.60
- 1 x Central Heating Dial Thermstat - Heatmiser DS1 $27.36
- 1 x Central Control - Heatmiser Touchpad $456.19
Currency Converter
Choose a currency below to display product prices in the selected currency.
