The Heatmiser HC is our heating and cooling thermostat offering three modes of operation ideal for 2 and 4 pipe systems. It provides a three speed fan output which can be set to manual or automatic mode.

Heating: In heating mode, you are able to set 4 switching times for the weekday and 4 different switching times for the weekend. Two temperature settings can be programmed (Day, Night)

During a switching time, the day temperature will be maintained, switching the fan between low, medium and high depending on the actual temperature when set in automatic mode. Outside the programmed times, the night temperature will be maintained.

Cooling: In cooling mode, 4 switching times can be set along with a cooling set point. The cooling output will be active when the actual temperature rises above the set point. With the fan in automatic mode, the HC will switch between low, medium and High 1ºC ,2ºC or 3ºC above the set point.

• Large display
• Automatic blue back-light (Turns off after 30 seconds)
• Flush mounting
• C/F Selection
• Self Learning Optimum Start (Heating Mode only)
• Heating, Cooling and Automatic modes available
• 30 minute timing increments
• 5 day/2 day Program
• (Weekday/Weekend programming)
• Up to 4 changes in room temperature
• Fan speed: Auto, High, Medium, Low
• Heating Output
• Cooling Output
• Frost protection
• Easily increase or decrease the required temperature
• Temperature range 05°C - 35°C
• Supply: 230v / 110v
• Outputs: 230v / 110v