Categories
- 230v Thermostats
- 12v Network Thermostats
- Electric Floor Thermostats
- Underfloor Heating Control Kits
- Wiring Centres
- Network Products
- Fan Thermostats
- Time Clocks / Programmers
- Accessories & Fixings
- Warm Air / Radiant Heating Controls
- Building Heating Management System
- Boiler Controls
- Industrial Sensors
Our Newsletter
Programmable Thermostat - Heatmiser PRT
- Price:
- $75.93 (including tax)
- SKU:
- Heatmiser PRT
Product Description
The following features are available on our programmable thermostat (PRT);
- Large display
- 5/2 day or 7 Day Programming (Selectable in software)
- Self Learning Optimum Start on 1st and 3rd Level
- Temperature Hold Facility
- Holiday Facility
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Remote control optional
- Supply: 230v /
- Outputs: Volt free 3A Max
- Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note this thermostat is flush mounting and so requires a back box)
Upgrading your Existing Thermostat and selecting the Terminal Output
1. Firstly, check that you have at least three wires (excluding the earth) behind your existing stat. If you have, the PRT is compatible.
2. Our changeover terminal option is for those controlling a valve that needs power to open and power to close. If you are simply controlling a boiler, just select the standard model.
Not sure if this is the right product for you? Click here to see our FAQ
 |  |
Product Reviews
-
Backlight
Posted by Tom on 15th Oct 2009
Q:Is the blue backlight permanently on or does it only come on with a button press? Is this configurable?
A: No: The backlight is only on for around 30s from the last key press
-
Power failure
Posted by Unknown on 13th Oct 2009
Q:Does the PRT retain its programmed functions if a power failure occurs?
A: Yes, the flash memory retains the programmed settings.
-
Compatibility
Posted by Ian on 17th Aug 2009
Q: Is this controller compatible with a Potterton boiler? The boiler is currently running off an inbuilt mechanical clock but i would like to add a controller for ease of use.
A: The Heatmiser PRT will work fine, but you need to check the wiring requirements. Our PRT requires at least 3 wires, excluding earth.
-
7 day feature
Posted by Mark on 11th Aug 2009
Q: How do i get the 7 day programming feature on the PRT
A: You need to go into the setup feature menu, go to feature 12 and set to 01. You may watch our demo here for a walk through http://www.heatmiser.co.uk/heatmiser_demos.htm
Warranty Information
- Home
- 230v Thermostats
- Slimline Thermostats
- Programmable Thermostat - Heatmiser PRT
Currency Converter
Choose a currency below to display product prices in the selected currency.
