Loading... Please wait...
Categories
- Display Boards
- 230v Thermostats
- Wireless Underfloor Heating Control Bundles
- Wireless Thermostats
- 12v Network Thermostats
- Electric Floor Thermostats
- Wiring Centres
- Network Products
- Fan Thermostats
- Time Clocks / Programmers
- Accessories & Fixings
- Warm Air / Radiant Heating Controls
- Building Heating Management System
- Boiler Controls
- Industrial Sensors
New Products
Our Newsletter
Wireless Two Zone Receiver - Heatmiser RC1-WTS
Product Description
The Heatmiser RC1-WTS is our two zone wireless receiver designed to work with the Touchscreen Wireless Thermostats.
Up to 2 DT-WTS/PRT-WTS or 1 PRTHW-WTS can be used with this wireless receiver.
Features Include
- 433 MHz Operating Frequency
- Operating Distance: Up to 100 Meters Open Space
- Power, Zone 1,2 and Communication LEDs
- Flush Mounting (Requries 35mm back box)
- 2 x Changeover Outputs Provided
- 3A Switching
- 230v Powered
Accessories
Product Questions
-
Compatibility with Net Monitor
Posted by Gary on 18th Apr 2010
Q: Can any of the wireless thermostats or receiver be connected to Net Monitor?
A: No, this is not possible.
-
Replacing a wall mounted thermostat
Posted by Unknown on 17th Apr 2010
Q: I currently have a simple digital mains supplied wall mounted room thermostat for my combi boiler. Will the wireless receiver simply connect to the existing cabling when the room thermostat is removed?
A: Yes, if you have at least three wires excluding the earth
-
Does the receiver replace the existing thermostat?
Posted by Dan Gray on 16th Apr 2010
Q: Does the receiver featured here replace my existing analogue thermostat? i.e connects to existing wiring?
A: Yes you can do that, or you could install at the boiler and do away with the thermostat wiring. If you are installing where the stat used to be, you need to check you have at least three wires.
-
Can I use the two zone facility if I don't have two separate heating zones
Posted by Unknown on 29th Mar 2010
Q;I Currently have a vented heating system with just one zone and one thermostat. Is it possible to use this product with the two thermostats. Such that the heating for thw whole house will come on if either thermostat is below its target temperature?
A: Yes, all you will need to do is make sure both outputs are linked together.
Your Shopping Cart
You have 3 items in your cart. Your sub total is £344.14.
- 1 x Heatmiser Radiant Sensor £25.26
- 1 x Internet Remote Control - Heatmiser Netmonitor £317.50
- 1 x Dry Lining Easy Fix Box - 35mm £1.38
Currency Converter
Choose a currency below to display product prices in the selected currency.
