Heatmiser PRT-TS WiFi - WiFi Enabled Programmable Thermostat

The Heatmiser PRT-TS WiFi is our 230v WiFi Enabled Programmable Touchscreen Thermostat, ideal for conventional or combi-boiler systems. This thermostat is hard wired to the boiler, requiring at least 3 wires.

The Heatmiser PRT-TS WiFi is our 230v WiFi Enabled Programmable Touchscreen Thermostat, ideal for conventional or combi-boiler systems. This thermostat is hard wired to the boiler, requiring at least 3 wires.

Control your heating from any web browser or our iPhone app.

The following features are available;

• WiFi Enabled (802.11b)
• Support for WEP (Open Mode), WPA and WPA2 security using password authentication
• Blue back-lit Touchscreen
• Automatic blue back-light (Turns off after 30 seconds)
• Flush mounting
• 5/2 Day Programmable (4 Levels per Day)
• 7 Day Programmable (4 Levels per Day)
• Hold Facility
• Hold Facility
• Optimum Start
• °C / °F Selectable
• Key Locking Facility
• Frost protection with adjustable temperature setting.
• Easily increase or decrease the required temperature
• 230v Powered
• Outputs: Volt free 3A Max
• Dimensions: 110x100x17mm
• CE Approved

 Installation

The WiFi Thermostats are flush mounting, therefore a 25mm back box is required.

Questions:

Q: What are the wiring requirements of this thermostat.

A: It requires 230v (L,N) to power the thermostat, and then it offers a volt free changeover contact for the heating circuit. In simple terms, if your existing thermostat has three wires, excluding the earth - you can upgrade.

Q: I already have a Heatmiser PRT/PRT-TS installed and would like to upgrade to this model, is that possible?

A: Yes, you can upgrade to this model.

Q: Do I need anything else to control my heating from the web or iPhone app?

A: You will need a WiFi router with port forwarding facility (most do) and if you don't have a fixed IP from your internet supplier, you will need to use a service called DynDNS. Don't worry - although we can't offer support on individual routers, we can certainly point you in the right direction.

Q: Can I setup the thermostat using a MAC?

A: At this time, our WiFi Thermostats are not MAC compatible,

Q: Where do I get the iPhone app, and how much does it cost?

A: You get this from the AppStore from your iPhone. It is a free app.

Q: Where do I get the Android app.

A: You get this from the Google Play Store. It is a free app.

	UK (Inc Northern Ireland) DELIVERY OPTIONS
	Order Value	Delivery Time	Cost
	Flat Rate	3-5 Working Days	£3.00

(Order before 1.00pm)
	Order Value	Delivery Time	Cost
	Flat Rate	Next Working Day	£10.20

(Generally 2 Day Delivery)	Southern Ireland & EU Countries*
	Order Value	Delivery Time (2 Working Days)	Cost
	Flat Rate	<£200	£12.00
		>£200	£15.00

*Excluding Switzerland, Norway and Jersey

International Delivery Charges calculated at checkout

Payment & Security

We are a secure site working with Moneybookers and Paypal. You can be totally confident when shopping with www.heatmisershop.co.uk

Our secure server encrypts your credit card information to ensure your transactions with us are private and protected as they travel over the internet. 

We do not see or store your credit card details - they are passed straight to our payment processors when you submit your order.